All 1995-98 Protege with VINs lower than JM1 BCW0 2000028.
The following customer complaints could be caused by an excessively worn valve face:
Rough idle
Lack of power
Poor acceleration
Engine speed does not increase
The intake valve has been modified. Customers complaining of this subject should have their vehicle inspected and repaired according to the following procedure.
1. Verify customer complaint.
2. Check compression according to the Workshop Manual section B (01).
If compression is still low, replace all of the intake valves with modified parts.
If compression is still low, replace all of the intake valves with modified parts.
If compression is still low, replace all of the intake valves with modified parts.
3. Verify repair.
|
Part Number |
Description |
Qty. |
|
Z50212111 |
Intake Valve |
8 |
NOTE: This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty term information. SRT microfiche lists RR of valves and not valve adjustment.,
|
Warranty Type |
A |
|
Symptom Code |
03, 06 or 14 |
|
Damage Code |
9C |
|
Part Number Main Cause |
Z502 12 111 |
|
Quantity |
8 |
|
Operation Number / Labor Hours |
A0147XAX / 1.3 (valve adjustment) XX980XR1 / 6.6 (intake valve replacement) |