B006/98 1995-98 Protege - EXCESSIVE VIBRATION AT IDLE, IN DRIVE OR REVERSE GEARS

Note: This bulletin supersedes the following TSB(s): b00598. Please update your records accordingly.

APPLICABLE MODEL(S)/VINS

1995-1998 Proteges with Z5 & BP engines and automatic transmissions.

DESCRIPTION

An excessive vibration may be felt at idle when the transmission is in drive or reverse gears. This may be caused by the No.1 engine mount material becoming hardened or cracked. A modified part is available which is more heat resistant. Customers complaining of this concern should have their vehicle repaired according to the following procedure.

REPAIR PROCEDURE

1. Verify customer complaint.

2. Inspect the No.1 engine mount for cracks and/or hardening.
   • If No.1 engine mount has failed, replace it with a modified part.
   • If No. 1 engine mount has not failed, refer to the Workshop Manual for further diagnostics.

3. Verify repair.

PART(S) INFORMATION

Part Number	Description	Qty.
BCYE 39 040	No. 1 engine mount	1

WARRANTY INFORMATION

NOTE: This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty term information.