POWER WINDOW INOPERATIVE

Applicable Models

See bulletin 09-032/04 issued 8/18/2004 for full details.               
                                                                        
Some vehicles may exhibit an inoperative power window when the main     
or sub switch of power window is depressed.  This may be caused by      
premature wear of the helical gear teeth.                               
                                                                        
Customers having this concern should have their vehicle repaired using  
the following repair procedure.                                         
                                                                        
Note:  Before performing repair procedure, be sure power window lock    
switch is off.                                                          
                                                                        
1.  Verify concern.                                                     
2.  Replace power window motor with modified part according to          
    WSM (section 09-12 POWER WINDOW MOTOR REMOVAL/INSTALLATION).        
3.  Verify repair.                                                      
                                                                        
Parts information                                                       
GJ6A-58-58XC      front right and rear left                             
G22C-59-58XC      front left and rear right