Cylinder heads from parts may come with an added oil passage by the oil
control valve under the intake camshaft. On an original or ealier part,
this oil passage is normally plugged.
Prior to installing new head, an oil filter and plug must be installed
in the new oil passage.
Tightening torque = 15-18Nm (11.1-13.3 ft-lbf)
Order the parts below, and refer to EPC "D-code" 143X2 (for 2006MY) for
installation picture. This is early information and subject to change
as additional details become available.
Parts Information
9XG1-04-510L Plug, blind Qty = 1
L3G2-14-3X2 Filter, oil Qty = 1